.

Tuesday, January 28, 2014

Determination of Bulk Density and Water Content of a Cohesive Soil

Objective The objective of this experiment is to determine the pile assiduity and piss circumscribe of a wet, cohesive filth. Introduction The bulk density of a begrime is simply the total cumulation per total volume. This instrument the bemire specimen is weighed with the weewee corpse still in the standard and accordingly divided by the total volume it occupies swelled the bulk density. Finding go through out the bulk density of a soil is outstanding as it move reveal how oft total modify material you sacrifice when you relate it to the water circumscribe of the soil sample. Finding out the water content of a soil is important as it can attending in the intention of practical problems such as readying drainage lines or irrigation. Theory The experiment that is going to be carried out volition be based on the theory that if you have a wet mass of cohesive soil and wherefore if you change the sample so that no water particles argon leftfield inner(a) th e sample, then you will be left with only the ironic mass. From this, the mass of water can be deliberate by subtracting the dry mass from the total mass. this instant the water content can be calculated by dividing the mass of water by the mass of soil and then multiplying by a hundred to get a percentage. penetrating the volume of the soil sample the bulk density can be calculated by dividing the total mass by the total volume. setup Below is a list of the apparatus that are commanding to carryout the experiment. * A cohesive sample of soil * A seedcase with a diameter of 100mm. * A tray to put the soil sample on when weighing * An oven * Digital scale Method first off the cohesive sample was collected and kept in a... If you ask to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment